EZ Snap RV Skirting Kit for 36-40 Ft Long Review

?Are you ready to keep your travel trailer protected all winter without drilling holes or calling a pro?

Quick Product Snapshot

Here’s a concise look to help you decide if the EZ Snap RV Skirting Kit for 36-40 Ft Long, Tall Travel Trailer – Camper Skirting Kit, No-Drill Combo Studs, Grey Snap Fasteners, RV Skirt for Winter, 2+ Slide-Outs, Quick & Easy to Install is the right solution for your rig. You’ll get a no-drill fastening system, Diamond Weave fabric panels, and a full complement of installation accessories designed for DIY use. This snapshot gives you the essentials so you can move into deeper sections with context.

What’s Included in the Kit

You’ll find everything needed to skirting a 36–40 ft travel trailer with 2+ slide-outs in this kit. The manufacturer includes vinyl panels, adhesive studs, snap fasteners, Velcro, clamps, pins, screws, primer pens, and a remover — aiming to make installation straightforward and repeatable. Because the kit bundles these items, you won’t need many extra supplies beyond maybe a utility knife and measuring tape.

Kit contents (detailed)

Below is a compact table to help you visualize exactly what arrives in the box and how each piece contributes to the installation process.

Item	Purpose	Typical Quantity/Notes
Diamond Weave vinyl panels	Main skirting material; cuttable without fray	Multiple panels sized to cover 36–40 ft trailer
No-Drill adhesive combo studs	Anchor points for snap fasteners	Provided in quantity based on kit size
Grey snap fasteners	Secure panels to studs and to each other	Matches stud spacing for consistent fit
Velcro strips	Seal irregular areas and slide-out seams	Used where snaps are less practical
Clamps & pins	Temporarily hold panels during trimming	Helpful for one-person installs
Screws & primer pens	For secured edges and surface prep	For use on tougher surfaces/rough prepping
Remover tool	For removing adhesive studs later	Useful if you need to reposition or remove panels
Instruction sheet	Step-by-step install guidance	Follow the fastener placement and adhesion tips

Materials and Build Quality

You’ll appreciate that the EZ Snap kit uses Diamond Weave fabric, which is tougher than basic polyethylene tarps and resists tearing and abrasion. The material is non-fray when cut, so you can trim panels on-site to fit around stairs, jacks, or odd angles. The snaps and adhesive studs feel sturdy, and the grey finish is neutral enough to blend with many trailer exteriors. Overall, you get a blend of durability and workability suited to harsh seasons.

Installation Experience

If you enjoy DIY projects, you’ll likely find this kit satisfying to install. The no-drill system removes the intimidation of power tools and potential damage to your trailer’s exterior. The process is mostly adhesive placement, snapping panels into place, and trimming to fit. You still need patience and attention to weather conditions during install, since adhesives prefer clean, dry, and moderate temperatures to bond properly.

Preparation

Preparation matters more than you might expect — cleaning surfaces, measuring, and having the right tools makes the rest of the job easier. You’ll want a clean trailer skirt line free of dirt, grime, and flaking paint so the adhesive studs will stick. Measure the perimeter, note slide-out locations and lengths, and sketch a rough plan for stud spacing; this will avoid having to rework panels once they’re on. If you take your time here, the install will feel smoother and more professional.

Attaching the No-Drill Studs

The adhesive combo studs are the heart of the installation — this is where the “no-drill” promise becomes real. You’ll use primer pens on the surface, peel the backing from studs, and press them firmly in place. Hold for the recommended cure time (follow the instruction sheet) to ensure a strong bond. Placing studs consistently along the trailer base will make snapping panels in easier and more secure. If you’re installing in colder weather, account for longer cure times.

Snapping Panels and Trimming

You’ll position the panels, snap them onto the studs, and work around corners and slide-outs using the non-fray edges to trim for fit. The panels can be overlapped or butted depending on how you want the seams to behave in snow or heavy wind. Use clamps and pins while you trim to keep panels steady. Because the fabric doesn’t fray, you can make precise cuts around vents, stabilizers, and irregular features without finishing raw edges.

Time and Tools Required

This kit is designed to minimize tool needs; a utility knife, measuring tape, marker, and a pair of pliers are typically all you’ll need beyond the kit contents. For a single installer expect a few hours to a full day depending on complexity (slide-outs, irregular tanks or jacks). With two people the same job is faster and less fiddly. Allow additional time in cold weather for adhesive curing.

Fit and Compatibility

You’ll want to match this kit to a 36–40 ft long trailer and consider the “tall” specification — it’s intended for taller travel trailer underbellies. The kit is more forgiving than rigid skirting systems because you can trim and position panels to navigate obstacles. If your trailer is outside that size window or has unusually shaped belly components, measure carefully; the kit is adaptable, but extreme deviations may require supplemental materials.

Weather Performance and Insulation

The Diamond Weave fabric isn’t a full thermal blanket but it greatly reduces wind-driven cold and minimizes drafts under the trailer. It acts as an effective barrier against snow, moisture, and wind, protecting the underbelly and plumbing from freezing. You’ll still want to combine it with passive insulation (foam board where possible) or internal heat sources in extreme climates, but for most seasonal winterizing needs this kit provides solid, practical protection.

Durability and Maintenance

Because the material resists fraying and the snaps are robust, you can expect multiple seasons from the kit if you install and store it properly. Inspect adhesive studs annually and replace any that show wear or loosen. Clean the fabric occasionally to prevent build-up of salt or road grime, and store the panels dry and rolled when not in use. With moderate care you’ll extend the life of both the fabric and fasteners.

Use with Slide-Outs and Irregular Areas

You’ll find the Diamond Weave fabric particularly useful around slide-outs because it trims cleanly and you can use Velcro to seal gaps that are awkward for snaps. The kit includes clamps and pins to temporarily hold panels as you cut around slide mechanisms. This flexibility makes it a better option than rigid skirts for trailers with multiple slide-outs or uneven undercarriage features.

Pros and Cons

You deserve a clear summary to weigh pros and cons side-by-side before buying. Below you’ll get the main strengths and potential drawbacks to decide if this kit matches your priorities and climate.

Pros

• No-drill adhesive studs simplify installation and help avoid permanent holes in your trailer. You’ll save time and minimize potential exterior damage.
• Diamond Weave material resists fraying so you can trim on-site for a custom fit around irregular features. That makes it user-friendly for single-person installs.
• Complete kit contains nearly every accessory you’ll need, reducing trips to hardware stores and simplifying logistics.
• Good performance against wind, snow, and moisture; it’s a practical solution for winterizing plumbing and underbellies.
• Reusable components and remover tool let you remove or reposition studs and panels seasonally.

Cons

• Adhesive studs rely on good surface prep and favorable temperatures for long-lasting adhesion; cold or dirty conditions complicate installs.
• The kit provides barrier protection but isn’t a full insulating system; in very cold climates you may need supplemental foam or heat.
• Larger or nonstandard trailer shapes might require additional material or creative attachment points.
• Over time, snaps and adhesives may need replacement — a normal tradeoff for no-drill convenience.

Comparison with Other Skirting Options

You’ll want to see how this kit stacks up against alternative methods: rigid foam board skirts, corrugated plastic, and DIY tarps. Each approach has trade-offs for price, durability, insulation, and ease of installation. The following table gives a quick, direct comparison to help you decide based on your priorities.

Option	Ease of Install	Insulation Value	Durability	Best For
EZ Snap RV Skirting Kit (this product)	High (no-drill, adhesive)	Low-to-moderate (wind block)	Moderate-to-high	Seasonal winterization, 2+ slide-outs, DIYers
Rigid Foam Board	Moderate (cut & secure)	High (good R-value)	Moderate (moisture sensitive)	Cold climates where insulation is priority
Corrugated Plastic Panels	Moderate (screws or brackets)	Low-to-moderate	Moderate	Lightweight rigid coverage with some durability
DIY Tarps & Weights	Easy (cheap)	Low	Low	Budget-minded short-term use

You’ll notice the EZ Snap kit sits in a sweet spot for people who want durable weather protection without the labor and permanence of rigid systems, especially if you’ve got slide-outs and irregular profiles.

Troubleshooting Common Issues

You’ll run into a few predictable hiccups and knowing fixes in advance will save frustration. If studs don’t adhere, re-clean the surface, use the primer pen, and ensure ambient temperatures meet the adhesive specs. If snaps pop in heavy wind, add more studs or adjust panel overlap. For trimming errors, the non-fray fabric lets you reshape without worry. If an adhesive stud must be removed, use the included remover tool to avoid damaging the surface.

Tips for Best Results

You’ll get better results by following several practical tips. Clean the trailer surface thoroughly with alcohol or the supplied primer pen. Install on a calm, dry day above the adhesive’s minimum temperature. Mark stud placement in advance, and consider slightly closer spacing in high-wind areas. Use Velcro at slide-outs for a flexible seal and foam board pieces where you want extra insulation. Finally, store panels rolled and dry at season’s end to preserve the fabric.

Maintenance and Storage

You’ll extend the kit’s service life by following a routine: clean the fabric after each season, check snaps and studs, and replace worn fasteners. Roll panels loosely to prevent creases and store in a dry area away from prolonged sunlight that might fade or degrade materials slowly. If you notice salt damage from road spray, rinse thoroughly to remove corrosives that can shorten component life.

Cost Considerations and Value

You’ll likely find the kit cost-effective compared to professional installation or custom rigid skirting. The up-front price covers materials that you can reuse for multiple seasons with proper care. When you factor in time saved and the avoidance of drilling into your trailer (and potential patching later), the value increases, especially for folks who winterize annually and prefer the flexibility to remove skirts in warmer months.

Environmental and Practical Considerations

You’ll appreciate that the kit reduces waste compared to single-use tarps and offers long-term reusability. The vinyl panels are not biodegradable, so consider your storage and maintenance habits to ensure a long lifespan. Also, doing the job yourself avoids service trips and transportation carbon costs tied to pro installers.

Real-World Use Cases

You’ll find this kit helpful in several common scenarios:

• Winter storage in snowy climates where wind-driven snow and moisture are major concerns.
• Seasonal setups when you want to remove skirting for summer travel and reinstall before winter.
• Trailers with two or more slide-outs that need flexible trimming and non-fraying panels.
• Campers wanting a no-drill option to protect underbelly plumbing and tanks.

Frequently Asked Questions

You’ll likely have practical questions before purchasing and installing this kit. The following Q&A covers common concerns and clarifies expectations.

Will the adhesive studs hold up in extreme cold?

Adhesive performance drops in very low temperatures; you should install the studs in recommended temperature ranges and allow full cure time. Once cured, they perform well through cold seasons, but initial adhesion benefits from moderate temps.

Can you install this kit by yourself?

Yes, you can install it alone, though an extra set of hands speeds up panel alignment and trimming. Use clamps and pins to hold panels while you snap them in or trim.

Is this kit suitable for marine coastal areas?

It’s usable in coastal areas, but you should rinse panels and snaps periodically to remove salt that could promote faster wear or corrosion for metal components.

How does this compare to hard foam skirting for insulation?

This kit is better for wind and moisture blocking and for dealing with slide-outs. Foam skirting generally provides higher thermal resistance. For cold climates you might combine both approaches.

Can you remove the studs later without damage?

Yes, the remover tool is included for that purpose. Proper removal reduces damage risks. Surface touch-up may be needed if you plan to reuse the same spots.

Troubleshooting Scenarios and Fixes

You’ll want quick fixes for common problems so you can keep your skirt functional with minimal fuss.

• Studs not sticking: Re-clean with the primer pen, ensure the surface is dry and above minimum temperature, press firmly and allow cure time.
• Snaps popping in wind: Add extra studs, reduce gap distances, or overlap panels differently to reduce stress on snaps.
• Fabric tearing at a seam: Trim back to a clean edge and reattach using Velcro or additional snaps. The Diamond Weave helps prevent long tears, making repairs easier.
• Adhesive residue: Use a suitable adhesive remover and follow with a surface-safe cleaner before reinstalling studs.

Installation Checklist

You’ll want a short checklist to streamline your install day. Here’s a simple sequence to follow so you don’t miss steps.

• Measure trailer perimeter and note slide-outs.
• Clean and prep surfaces with primer pens provided.
• Lay out panels dry to plan stud spacing.
• Apply adhesive studs and allow proper cure time.
• Snap in panels starting from one corner and working around the trailer.
• Trim around obstructions and use Velcro on slide-outs.
• Inspect seals and add extra hardware where wind might stress panels.

Safety Notes

You’ll work safely if you avoid installing in high winds or precipitation and use a stable ladder or platform when placing studs higher on the trailer. Keep utility knives pointed away from yourself when trimming, and follow adhesive safety guidelines, including ventilation if using primers in confined spaces.

Final Verdict and Buying Advice

You’ll find the EZ Snap RV Skirting Kit for 36-40 Ft Long, Tall Travel Trailer – Camper Skirting Kit, No-Drill Combo Studs, Grey Snap Fasteners, RV Skirt for Winter, 2+ Slide-Outs, Quick & Easy to Install to be a strong choice if you want a balance of durability, convenience, and adaptability. It’s particularly attractive if you want a no-drill approach, have slide-outs, and plan to reinstall seasonally. If your top priority is maximum thermal insulation, consider supplementing this kit with foam board or choosing a rigid system; otherwise the EZ Snap kit offers great value for most winterizing needs. You’ll save time, avoid external damage, and gain a reusable, manageable solution that works well for DIYers.

If you want, tell me about your trailer’s length, slide-out count, and typical winter conditions and I’ll offer a tailored install plan and studs spacing recommendation to fit your setup.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.